[arch-general] Arch Linux USB stick won't boot

[steve at vwebr.net]

Whew!  OK, thanks! 

All is well then. 

Steve

On 2019-03-22 17:41, Khorne wrote:

> Hi Steve,
> 
> that *is* the booted Arch ISO.
> There is no graphical installer (which you presumably expect).
> 
> Follow https://wiki.archlinux.org/index.php/installation_guide to continue from the shell prompt.
> 
> Regards,
> Khorne
> 
> March 22, 2019 11:19 PM, steve at vwebr.net wrote:
> 
> Hello Everyone, 
> 
> I followed the instructions to use DD mode in Rufus and I got much
> further in the boot process than the first couple times I tried. 
> 
> A few screens of info passed by...before it didn't even get halfway down
> the first screen of info. That's good progress in my book. 
> 
> However it stopped at a shell prompt. 
> 
> The picture I took is at this link: 
> 
> https://imgur.com/a/xrunl82 
> 
> I was going to use Trisquel Mini until I found out they have such an
> attitude about everything being free or non-free that they don't include
> many wifi drivers. 
> 
> The driver in this Intel Compute Stick is 'virtualized' so that leaves
> me to wonder what drive is compatible. 
> 
> The original Ubuntu bloated carcass that was on there was compatible
> hardware-wise, but of course their massive load of updates made the
> machine unusable. 
> 
> Anyway, I'm a practical person so I hope you have better stock of
> drivers once I get over this issue with booting from USB. 
> 
> Thanks, 
> 
> Steve 
> 
> On 2019-03-21 23:42, Robert Crawford via arch-general wrote:
> 
> On Thu, Mar 21, 2019 at 5:39 PM <steve at vwebr.net> wrote:
> OK, gotcha..."Write in DD Image mode".
> 
> I see that and I'll try it.
> 
> Thanks a bunch!!!
> 
> Steve Sybesma
> 
> On 2019-03-21 16:11, Tomasz Kramkowski via arch-general wrote:
> 
> On Thu, Mar 21, 2019 at 03:56:28PM -0600, steve at vwebr.net wrote:
> 
> Hello everyone,
> 
> I tried installing archlinux-2019.03.01-x86_64.iso onto my Intel Compute
> Stick STCK1A8LFC, but got this at the very beginning when I tried
> booting a USB stick created by Rufus.
> 
> https://imgur.com/a/nEjA248 <-- See picture at this link
> 
> I did not experience the lack of booting the USB stick with any other
> distros I tried (about 6-7 others). They all booted fine and were
> created in Rufus the same way.
> 
> BIOS setting is the same as others as well...UEFI shell disabled (that
> is a must), USB boot enabled, and Secure Boot disabled. There is no
> Legacy Boot/CSM option. Stuck on UEFI.
> 
> See picture attached for what happens when I try to boot from the USB
> stick I created.
> 
> Particulars...
> 
> Hardware:
> 
> https://ark.intel.com/content/www/us/en/ark/products/86613/intel-compute-stick-stck1a8lfc.html
> 
> Screenshot of creation of Rufus USB stick (exact same method as others I
> did which all booted fine):
> 
> https://imgur.com/a/AB11PSP <-- See picture at this link
> 
> Thanks for any help you can provide.
> 
> Steve Sybesma
> Brighton, CO USA
> Hi Steve,
> 
> Have you tried using a tool like dd or something equivalent to directly
> write the iso to the USB flash drive?
> 
> Taking a quick look at our wiki, it seems like Rufus can perform that
> task if it is configured correctly. The instructions are here:
> 
> https://wiki.archlinux.org/index.php/USB_flash_installation_media#Using_Rufus
> 
> It seems that after clicking "START" on the screen in the screenshot you
> provided the software should prompt for a mode. Select "DD Image mode."
> 
> Kind regards, 
> I just installed Arch on a HP Probook laptop. I used Etcher using
> Manjaro. Works great.