[arch-commits] Commit in linux/trunk (config.x86_64)

[Tobias Powalowski]

    Date: Sunday, March 25, 2012 @ 09:16:13
  Author: tpowa
Revision: 154293

remove not needed GPIO

Modified:
  linux/trunk/config.x86_64

---------------+
 config.x86_64 |   62 +++++++++++++++++++++-----------------------------------
 1 file changed, 24 insertions(+), 38 deletions(-)

Modified: config.x86_64
===================================================================
--- config.x86_64	2012-03-25 13:06:08 UTC (rev 154292)
+++ config.x86_64	2012-03-25 13:16:13 UTC (rev 154293)
@@ -99,7 +99,6 @@
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_IRQ_SHOW=y
 CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_GENERIC_IRQ_CHIP=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_SPARSE_IRQ=y
 
@@ -2504,8 +2503,8 @@
 CONFIG_KEYBOARD_QT1070=m
 CONFIG_KEYBOARD_QT2160=m
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_GPIO_POLLED=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
 CONFIG_KEYBOARD_TCA6416=m
 CONFIG_KEYBOARD_TCA8418=m
 CONFIG_KEYBOARD_MATRIX=m
@@ -2532,7 +2531,7 @@
 CONFIG_MOUSE_APPLETOUCH=m
 CONFIG_MOUSE_BCM5974=m
 CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
+# CONFIG_MOUSE_GPIO is not set
 CONFIG_MOUSE_SYNAPTICS_I2C=m
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_JOYSTICK_ANALOG=m
@@ -2634,7 +2633,7 @@
 CONFIG_INPUT_MPU3050=m
 CONFIG_INPUT_APANEL=m
 CONFIG_INPUT_GP2A=m
-CONFIG_INPUT_GPIO_TILT_POLLED=m
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
 CONFIG_INPUT_ATLAS_BTNS=m
 CONFIG_INPUT_ATI_REMOTE2=m
 CONFIG_INPUT_KEYSPAN_REMOTE=m
@@ -2719,11 +2718,10 @@
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_MFD_HSU=m
-CONFIG_SERIAL_UARTLITE=m
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_JSM=m
-CONFIG_SERIAL_TIMBERDALE=m
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_SERIAL_ALTERA_JTAGUART=m
 CONFIG_SERIAL_ALTERA_UART=m
 CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
@@ -2777,14 +2775,7 @@
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MUX=m
-
-#
-# Multiplexer I2C Chip support
-#
-CONFIG_I2C_MUX_GPIO=m
-CONFIG_I2C_MUX_PCA9541=m
-CONFIG_I2C_MUX_PCA954x=m
+# CONFIG_I2C_MUX is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_SMBUS=m
 CONFIG_I2C_ALGOBIT=m
@@ -2823,7 +2814,7 @@
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_DESIGNWARE_PCI=m
-CONFIG_I2C_GPIO=m
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_INTEL_MID=m
 CONFIG_I2C_OCORES=m
 CONFIG_I2C_PCA_PLATFORM=m
@@ -2877,40 +2868,37 @@
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GENERIC=m
-CONFIG_GPIO_MAX730X=m
 
 #
 # Memory mapped GPIO drivers:
 #
-CONFIG_GPIO_GENERIC_PLATFORM=m
-CONFIG_GPIO_IT8761E=m
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_IT8761E is not set
 CONFIG_GPIO_SCH=m
-CONFIG_GPIO_VX855=m
+# CONFIG_GPIO_VX855 is not set
 
 #
 # I2C GPIO expanders:
 #
-CONFIG_GPIO_MAX7300=m
-CONFIG_GPIO_MAX732X=m
-CONFIG_GPIO_PCA953X=m
-CONFIG_GPIO_PCF857X=m
-CONFIG_GPIO_ADP5588=m
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
 #
 CONFIG_GPIO_CS5535=m
 CONFIG_GPIO_LANGWELL=y
-CONFIG_GPIO_PCH=m
-CONFIG_GPIO_ML_IOH=m
-CONFIG_GPIO_TIMBERDALE=y
-CONFIG_GPIO_RDC321X=m
+# CONFIG_GPIO_PCH is not set
+# CONFIG_GPIO_ML_IOH is not set
+# CONFIG_GPIO_RDC321X is not set
 
 #
 # SPI GPIO expanders:
 #
-CONFIG_GPIO_MCP23S08=m
+# CONFIG_GPIO_MCP23S08 is not set
 
 #
 # AC97 GPIO expanders:
@@ -2920,7 +2908,6 @@
 #
 # MODULbus GPIO expanders:
 #
-CONFIG_GPIO_JANZ_TTL=m
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -2974,7 +2961,7 @@
 CONFIG_SENSORS_G760A=m
 CONFIG_SENSORS_GL518SM=m
 CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_GPIO_FAN=m
+# CONFIG_SENSORS_GPIO_FAN is not set
 CONFIG_SENSORS_CORETEMP=m
 CONFIG_SENSORS_IBMAEM=m
 CONFIG_SENSORS_IBMPEX=m
@@ -3169,10 +3156,10 @@
 CONFIG_AB8500_CORE=y
 # CONFIG_AB8500_DEBUG is not set
 CONFIG_MFD_CS5535=m
-CONFIG_MFD_TIMBERDALE=m
+# CONFIG_MFD_TIMBERDALE is not set
 CONFIG_LPC_SCH=m
 CONFIG_MFD_RDC321X=m
-CONFIG_MFD_JANZ_CMODIO=m
+# CONFIG_MFD_JANZ_CMODIO is not set
 CONFIG_MFD_VX855=m
 CONFIG_MFD_WL1273_CORE=m
 # CONFIG_REGULATOR is not set
@@ -3482,7 +3469,6 @@
 CONFIG_RADIO_TEA5764=m
 CONFIG_RADIO_SAA7706H=m
 CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_TIMBERDALE=m
 CONFIG_RADIO_WL1273=m
 
 #
@@ -4421,8 +4407,8 @@
 CONFIG_LEDS_LM3530=m
 CONFIG_LEDS_NET5501=m
 CONFIG_LEDS_PCA9532=m
-CONFIG_LEDS_PCA9532_GPIO=y
-CONFIG_LEDS_GPIO=m
+# CONFIG_LEDS_PCA9532_GPIO is not set
+# CONFIG_LEDS_GPIO is not set
 CONFIG_LEDS_LP3944=m
 CONFIG_LEDS_LP5521=m
 CONFIG_LEDS_LP5523=m